- #BU 353 S4 USB GPS RECEIVER SERIAL#
- #BU 353 S4 USB GPS RECEIVER PORTABLE#
- #BU 353 S4 USB GPS RECEIVER SOFTWARE#
- #BU 353 S4 USB GPS RECEIVER PC#
- #BU 353 S4 USB GPS RECEIVER WINDOWS 8#
Note: Specification may alter without notice, and presume best conditions for reception etc. Standard interface USB 2.0 with virtual com port driverĭimensions approx (mm) 56 x 53 x 19 (2.20" x 2.08" x 0.88")
#BU 353 S4 USB GPS RECEIVER SERIAL#
Serial port (virtual com port via USB driver) Note: There is improved accuracy with WAAS/ENGOS availabilityĥ v +-0.5Vp-p DC input (fed from USB) at 55mA max Inertial Measurement Units (IMU): Similarly to the GPS receivers. Position <15m CEP(95% horizontal, SA off (optimum conditions) being the Phidgets 1040 ten times faster than the US GlobalSat BU-353S4.
#BU 353 S4 USB GPS RECEIVER PORTABLE#
Small size - ideal for use with portable navigation systemsīuilt in high-sensitivity antenna for the bestĬompatible with both seaPro and seaPro lite If the LED is flashing it indicates the BU-353 has a position fix and is transmitting data. Try moving the GPS receiver to a clear location. If the LED is solid it indicates the BU-353 is searching for a GPS signal. If the LED is off there is no power being received. SiRF star III Chipset - 48 channel for high performance satellite reception There is a small LED located on the BU-353.
#BU 353 S4 USB GPS RECEIVER PC#
If a GPS position is vital for safety, then a hand held GPS with its own display should also be carried in case of PC failure.
#BU 353 S4 USB GPS RECEIVER SOFTWARE#
The BU-353 S4 GPS does not have any user display (LCD) and must be used with a laptop and suitable software (seaPro). Satellite acquisition giving faster initial position and a built in high-sensitivity antenna for the best USGlobalSat BU-353-S4 USB GPS Receiver The BU-353-S4 is a USB GPS receiver that features a highly sensitive low power consumption chipset in a ultra compact. This new generation of GPS includes the latest SiRFstar IV technology for increased performance with 48 channel parallel acquisition. The USB connection of the BU-353 S4 means no addtional USB to serial converter, and no need for additional power connections as power comes direcly from the USB connection. Featuring a simple USB conection to the PC it offers fantastic value for money.Įarlier Windows versions (XP/Vista) depends on system as operating system are no longer suypported by Microsoft.
#BU 353 S4 USB GPS RECEIVER WINDOWS 8#
Note: If using Windows 8 type devmgmt from the Windows 8 start screen and select Device Manager. About The BU-353-S4 USB GPS ReceiverThe BU-353-S4 is a USB GPS receiver that features a highly sensitive, low power consumption chipset in a ultra compact form. Click Start, type device manager in the Search box, and then press Enter.
Do the following steps in order to test the dongle, the kernel module, the mount, the device node, and gpsd: If there's no gpsd output, then do a more detailed check. gpsmon can help diagnose that problem, too. Restart gpsmon each time you restart gpsd.Ĭould tango be starting too soon? The dongle requires a few seconds to sort out the signals, identify satellites, and calculate a fix udev requires a few seconds to start gpsd, which in turn requires a few seconds to probe the dongle (which may not be ready yet) and begin broadcasting useful information when the data stream finally begins.
Open a separate terminal window and run gpsmon (included in the 'gpsd-clients' package) to check gpsd output. Try the -b flag (for example, gpsd -b /dev/ttyUSB0)